The Commercial Paint and Coating Guide
From acrylic latex and elastomeric coatings to epoxy floors, rust-inhibiting primers and reflective roofs, with what each one does, where it works and what to watch for. Pick one and see it ranked in the Coating Finder.

wallsA water-based coating that stays flexible, resists fade and cleans up with water
- Best for
- Offices, retail walls, siding and stucco
- Cure and care
- Dries fast and can be recoated within hours
- Watch for
- Needs a clean, dry surface and mild temperatures
wallsA low-odor, low-emission interior paint for occupied spaces and sensitive rooms
- Best for
- Clinics, schools, offices and senior living
- Cure and care
- Ready for use soon, with little smell
- Watch for
- Choose a durable grade for high-traffic walls
wallsA thick, flexible coating that bridges hairline cracks and sheds water
- Best for
- Stucco, block and concrete walls
- Cure and care
- Applied thick, so it needs time between coats
- Watch for
- Not for walls that must breathe a great deal
wallsA heavy primer that fills the pores in block and rough masonry before the color goes on
- Best for
- Block, brick and rough concrete
- Cure and care
- Fills in one coat and dries to a sealed base
- Watch for
- Needs a dry wall and good cleaning first
specialtyA primer that locks in water, smoke and tannin stains so they do not bleed through
- Best for
- Repairs after leaks, smoke and marks
- Cure and care
- Seals stains once the cause is fixed
- Watch for
- Fix the leak first, because primer cannot stop water
floorsA two-part coating that cures to a hard, seamless, chemical-resistant floor
- Best for
- Warehouses, kitchens, garages and showrooms
- Cure and care
- Needs a ground slab and full cure time before traffic
- Watch for
- Moisture in the slab can lift it, so test first
floorsA tough clear or colored topcoat with excellent abrasion and UV resistance
- Best for
- Over epoxy floors, on metal and high-wear areas
- Cure and care
- Cures in controlled conditions
- Watch for
- Sensitive to moisture and cold during application
metalA primer that slows rust and bonds to cleaned steel for the topcoat
- Best for
- Structural steel, rails, tanks and equipment
- Cure and care
- Goes on right after the steel is cleaned
- Watch for
- Must go on clean steel before it can rust again
metalA hard, smooth enamel for doors, frames and trim that takes knocks and cleaning
- Best for
- Doors, hollow metal frames and trim
- Cure and care
- Dries to a hard film over a day or more
- Watch for
- Some alkyds yellow in shade, so choose by room
specialtyA coating that swells in heat to protect steel, applied to a measured thickness
- Best for
- Structural steel called for by the plans
- Cure and care
- Thickness is measured and recorded
- Watch for
- The rating comes from your engineer and inspector
roofA white or light coating that reflects sun, seals seams and lowers roof surface heat
- Best for
- Flat and low-slope roofs, metal roofs
- Cure and care
- Needs a clean, dry roof and dry weather to cure
- Watch for
- Standing water and damaged areas need repair first
floorsA textured coating with grip for wet, sloped or busy walking surfaces
- Best for
- Ramps, docks, stairs and wet areas
- Cure and care
- Texture is matched to wetness and cleaning
- Watch for
- More grip means more cleaning effort
No coating matches that. Try a shorter word, or call (800) 224-9245.
Try the Sheen Selector
- This sheen is-
- Shows flaws-
- Cleans-
- Best for-
Saved. It travels with the form at the bottom of this page.
A screen picture, not a sample. Real walls, paints and lights differ, so we paint sample patches on your own wall before the full job.
Want help choosing?
Tell us about your building and what the surfaces face. We will bring samples, suggest coatings and colors and write a plan you can compare.
