Skip to content
Surface Prep and Repair

Sandblasting and Abrasive Prep

Heavy rust and thick old coatings need real preparation. We blast steel, concrete and masonry with suitable media and controlled containment, reach the cleanliness and profile your coating system needs and prime quickly before the surface can flash-rust.

Sandblasting and Abrasive Prep by Commercial Paint Service
  • MediaSand alternatives, garnet, slag, soda
  • SurfacesSteel, masonry, concrete
  • StandardsCleanliness and profile to the coating spec
  • ContainmentBarriers and dust control
What you get

What is included

  1. 1Surface profile rightCoatings bond to what the blast leaves.
  2. 2Primed quicklyBefore rust can return.
  3. 3ContainedBarriers and cleanup around the work.
  4. 4Gentle optionsSofter media for delicate surfaces.
How it works

From your first call to the final walk-through

We work in cities across the country. Find your city below and tell us about your property.

  1. 1You call or send the formTell us what you see: peeling, stains, cracks, mildew or old coatings. A few close-up photos of the worst areas are enough to start.
  2. 2We walk the siteWe inspect the surface up close, test how well the old coating holds, find the cause of any damage and choose the gentlest method that works.
  3. 3You approve a clear plan and priceYou see what will be cleaned, repaired or removed, the products we will use, the cure times and the price in writing.
  4. 4We paint it and walk it with youWe do the prep carefully, repair what is damaged, check it before any coating goes on and show you the surface ready to paint.
Good fit when

Is this right for your property?

  • Steel is heavily rusted
  • Old coatings will not come off
  • Masonry needs deep cleaning
  • A coating spec needs a blasted surface
Good to know

What makes prep worth the time

  • The cause comes firstWe look for why the damage happened so it does not return.
  • The gentlest method that worksWashing, scraping and blasting are matched to the surface.
  • Checked before colorWe inspect the repaired surface before any coating goes on.
Questions

Common questions

Is blasting safe for brick?

Aggressive blasting can damage brick, so we use gentle media and test a small area first.

What media do you use?

We choose by surface, from soft soda to steel-cleaning abrasives, and avoid dusty silica sand.

Can you blast in an occupied building?

Often outdoors or in sealed zones. We plan containment carefully.

Where we work

Find your city

Type your city or state to open the page for help near you. We serve cities across the country.

Start typing, for example a city name or a state.

    Ready to repaint?

    Call or text Commercial Paint Service, or send the form, and tell us about the building. We reply with clear next steps and a plan that fits your property and your hours.

    Schedule an estimate

    Let's paint your building.

    Tell us about the building, what you want painted and when it can be worked on. We read every message and reply with clear next steps and a time to walk the property that fits your day.

    • Your city, the kind of building and a rough size. A photo of the building is perfect
    • The colors, surfaces or areas you have in mind and anything you added to your plan or saved from a Color Lab tool
    • A clear plan and price before any work starts, and a walk-through of the finished building with you when we are done
    Prefer to talk? Call or text(800) 224-9245

    Your estimate request

    Prefer to type? Text your request. We only use your details to respond to your request.