Glossary
Commercial Painting Glossary: Terms in Plain English
Primer, sheen, cutting in, elastomeric, epoxy, spread rate, cure time and more, explained in a sentence or two.

- Primer
- A first coat that grips the surface, seals it and gives the color coat an even base.
- Finish coat
- The final coat or coats that give a surface its color and sheen.
- Sheen
- How much light a painted surface reflects, from flat to gloss.
- Flat
- A matte finish that hides bumps and patches but marks and cleans less easily.
- Eggshell
- A low sheen between flat and satin, common in offices and lobbies.
- Satin
- A soft sheen that wipes clean, used in corridors, classrooms and busy walls.
- Semi-gloss
- A shiny finish for trim, doors and wet areas that cleans easily.
- Cutting in
- Painting a clean line by brush along edges, ceilings and trim before rolling.
- Back-rolling
- Rolling over freshly sprayed paint to push it into the surface and even the texture.
- Airless sprayer
- A pump that atomizes paint under high pressure for fast, even coverage on large areas.
- Caulk
- A flexible sealant that fills gaps and joints so water stays out and paint lines look clean.
- Spackle
- A paste used to fill small holes and dents before painting.
- Skim coat
- A thin layer of joint compound spread over a surface to make it smooth.
- Chalking
- A powdery film on old paint that forms as the binder wears away in sun.
- Efflorescence
- White salt deposits left on masonry when water moves through and evaporates.
- Mildew
- A surface mold that grows on damp paint and must be cleaned before repainting.
- VOC
- Volatile organic compounds, the chemicals in some paints that cause odor and emissions.
- Low-VOC
- Paint made with fewer of those chemicals for better indoor air.
- Elastomeric
- A thick, flexible coating that stretches over hairline cracks and sheds water.
- Epoxy
- A two-part coating that cures hard and chemical-resistant, often used on floors.
- Urethane
- A tough coating with excellent abrasion and UV resistance, often used as a topcoat.
- Intumescent
- A coating that swells in fire to insulate steel, applied to a measured thickness.
- Surface profile
- The roughness of a prepared surface that gives a coating something to grip.
- Spread rate
- How many square feet a gallon of paint covers on a given surface.
- Film thickness
- How thick a dried coating is, measured in thousandths of an inch.
- Dry time
- How long paint takes to be dry to the touch and ready for another coat.
- Cure time
- How long a coating takes to reach full hardness and resistance.
- Masking
- Covering areas with tape, film and paper so paint goes only where it should.
- Drop cloth
- A cover laid over floors and furniture to catch drips and spatter.
- Punch list
- The final list of small fixes to complete before a job is signed off.
No term matches that. Try a shorter word, or call (800) 224-9245.
Still have a question?
Call or text, or send the form. We are happy to explain.
